Blok-Guard & Graffiti Control 9
Water & graffiti repellent
Blok-Guard & Graffiti Control 9
Water & graffiti repellent
Description
Blok-Guard & Graffiti Control 9 (formerly called Blok-Guard & Graffiti Control) is a water and graffiti repellent formulated to weatherproof custom masonry units, cast stone, architectural concrete block, precast concrete, wood and other porous masonry materials, like brick, unglazed terra cotta, porous tile and some natural stones. It protects masonry surfaces from repeated graffiti attacks without altering the surface’s natural appearance. Treated surfaces resist penetration of most types of graffiti.
Blok Guard Product Family
which product is right for your project
**The following products are ranked on a scale of 1-5, with 1 being the lowest performance (OK to use, but not preferred) and 5 being the highest performance (most effective for the task).**
Always test to ensure desired results.
| Product Name | Solids Content | Base/Carrier | ||
|---|---|---|---|---|
| Blok-Guard & Graffiti Control WB 6 | 6% | Water | 5 | 2 |
| Blok-Guard & Graffiti Control WB 15 | 15% | Water | 5 | 5 |
| Blok-Guard & Graffiti Control 9 | 9% | Solvent | 5 | 3 |
| Blok-Guard & Graffiti Control 15 | 15% | Solvent | 5 | 5 |
| Blok-Guard & Graffiti Control VOC 9 | 9% | VOC Exempt Solvent | 5 | 4 |
| Blok-Guard & Graffiti Control VOC 15 | 15% | VOC Exempt Solvent | 5 | 5 |
FEATURES
- Treated surfaces resist penetration of most types of graffiti.
- Simplifies graffiti removal.
- Effective protection for hard-to-seal surfaces.
- Controls rainwater penetration through exterior block walls.
- Helps control efflorescence, mildew and other moisture-related stains.
- Resists water penetration when applied over existing shrinkage cracks of 0.02 inches or less.
TECHNICAL DATA
SHELF LIFE
1 year in tightly sealed, unopened container
VOC CONTENT
>600 g/L
FORM
Clear, colorless liquid; petroleum odor
PH
Non-applicable
COVERAGE RATE
30-250 sq ft/gal. See Product Data Sheet for specific variations per substrate.
FREEZE POINT
<–22° F (<–30° C)
FLASH POINT
100° F (38° C) ASTM D 3278
TOTAL SOLIDS
9% ASTM D 2369
WT/GAL
6.67 lbs
AVAILABLE SIZES
5-gal
OVERVIEW
Blok-Guard & Graffiti Control 9 penetrates and fills pores to prevent water penetration through exterior walls exposed to normal weathering. Graffiti removal is fast and easy using PROSOCO's Graffiti Remover. Blok-Guard & Graffiti Control 9 is easy to apply with low-pressure spray. Treated surfaces exhibit excellent surface beading and withstand extreme temperatures. Offers excellent UV stability.
Vauncele Pearson
Customer Support
BLOK-GUARD & GRAFFITI CONTROL 9
PRODUCT SUPPORT
