Blok-Guard & Graffiti Control Ultra 15
<100 g/L water & graffiti repellent
Blok-Guard & Graffiti Control Ultra 15
<100 g/L water & graffiti repellent
Description
Blok-Guard & Graffiti Control Ultra 15 is a high-performance, clear, solvent-based silicone elastomer formulated to weatherproof concrete block and other porous masonry materials. Blok-Guard & Graffiti Control Ultra 15 protects masonry surfaces from repeated graffiti attacks with little to no change to the natural appearance.
Documentation
- Product Data Sheet
- Safety Data Sheet
- Safety Data Sheet (Spanish)
- SDS Canadian French
- VOC Compliance
- Product Specification
Green Building Information
Blok Guard Product Family
which product is right for your project
**The following products are ranked on a scale of 1-5, with 1 being the lowest performance (OK to use, but not preferred) and 5 being the highest performance (most effective for the task).**
Always test to ensure desired results.
| Product Name | Solids Content | Base/Carrier | ||
|---|---|---|---|---|
| Blok-Guard & Graffiti Control II | 6% | Water | 5 | 2 |
| Blok-Guard & Graffiti Control | 9% | Solvent | 5 | 3 |
| Blok-Guard & Graffiti Control Ultra | 9% | VOC Exempt Solvent | 5 | 4 |
| Blok-Guard & Graffiti Control 15 | 15% | Solvent | 5 | 5 |
| Blok-Guard & Graffiti Control Ultra 15 | 15% | VOC Exempt Solvent | 5 | 5 |
| Blok-Guard & Graffiti Control WB 15 | 15% | Water | 5 | 5 |
FEATURES
-Treated surfaces resist penetration of most types of graffiti.
-Simplifies graffiti removal.
-Effective protection for hard-to-seal surfaces.
-Controls rainwater penetration through exterior block walls.
-Helps control efflorescence, mildew and other moisture-related stains.
-Resists water penetration when applied over existing shrinkage cracks of 0.02 inches or less
TECHNICAL DATA
SHELF LIFE
1 year in tightly sealed, unopened container
VOC CONTENT
<100 g/L
FORM
clear liquid, petroleum odor
PH
Non-applicable
COVERAGE RATE
30-250 sq ft/gal. See Product Data Sheet for specific variations per substrate.
FREEZE POINT
<–22° F (<–°30 C)
FLASH POINT
100° F (38°C) ASTM D3278
TOTAL SOLIDS
15% ASTM D2369
WT/GAL
10.62 lbs
AVAILABLE SIZES
1-gal, 5-gal
OVERVIEW
Blok-Guard & Graffiti Control Ultra 15 penetrates and fills pores to prevent water penetration through exterior walls exposed to normal weathering. Graffiti removal is fast and easy using PROSOCO's Graffiti Remover product. Blok-Guard & Graffiti Control Ultra 15 is easy to apply with low-pressure spray, brush or roller. Treated surfaces exhibit excellent surface beading, withstand extreme temperatures and do not trap moisture. Offers excellent UV stability.
Colleen Peters
Customer Support
BLOK-GUARD & GRAFFITI CONTROL ULTRA 15
PRODUCT SUPPORT
