Blok-Guard & Graffiti Control WB 6

Water-based graffiti and water repellent for porous masonry

  • Graffiti-removal-from-Blok-Guard-and-Graffiti-Control-II-protected-concrete
  • Graffiti-removal-from-Blok-Guard-and-Graffiti-Control-II-protected-concrete

Blok-Guard & Graffiti Control WB 6

Water-based graffiti and water repellent for porous masonry

Blok-Guard & Graffiti Control WB 6 (formerly called Blok-Guard & Graffiti Control II) is a clear-drying, water-based silicone emulsion for weatherproofing concrete block and other porous masonry materials. Blok-Guard & Graffiti Control WB 6 protects interior and exterior masonry surfaces from graffiti attacks without altering the natural appearance.

Blok Guard Product Family

which product is right for your project

**The following products are ranked on a scale of 1-5, with 1 being the lowest performance (OK to use, but not preferred) and 5 being the highest performance (most effective for the task).**
Always test to ensure desired results.
Product Name Solids Content Base/Carrier
Blok-Guard & Graffiti Control WB 6 6% Water 5 2
Blok-Guard & Graffiti Control WB 15 15% Water 5 5
Blok-Guard & Graffiti Control 9 9% Solvent 5 3
Blok-Guard & Graffiti Control 15 15% Solvent 5 5
Blok-Guard & Graffiti Control VOC 9 9% VOC Exempt Solvent 5 4
Blok-Guard & Graffiti Control VOC 15 15% VOC Exempt Solvent 5 5

FEATURES

-Treated surfaces resist penetration of most types of graffiti.

 

-Low-odor. Excellent UV stability.

 

-Simplifies graffiti removal.

 

-Effectively protects hard-to-seal surfaces.

 

-Suitable for exterior and interior use.

 

-Resists water penetration when applied over existing shrinkage cracks of 0.02 inches or less.

TECHNICAL DATA

SHELF LIFE

1 year in tightly sealed, unopened container

VOC CONTENT

<20 g/L Low Solids Coating

FORM

White liquid, slight odor

PH

Non-applicable

COVERAGE RATE

30-175 sq ft/gal. See Product Data Sheet for specific variations per substrate.

FREEZE POINT

32° F (0° C)

FLASH POINT

>212° F (>100° C) ASTM D 3278

TOTAL SOLIDS

6% ASTM D 2369

WT/GAL

8.32 lbs

AVAILABLE SIZES

5-gal, 55-gal

OVERVIEW

Blok-Guard & Graffiti Control WB 6 (formerly called Blok-Guard & Graffiti Control II)  is a clear-drying, water-based silicone emulsion for weatherproofing concrete block and other porous masonry materials. Blok-Guard & Graffiti Control WB 6 protects interior and exterior masonry surfaces from graffiti attacks without altering the natural appearance.

 

Blok-Guard & Graffiti Control WB 6 also protects exterior walls exposed to normal weathering. Graffiti removal from treated surfaces is fast and easy using PROSOCO's Graffiti Remover product. Blok-Guard & Graffiti Control WB 6 is easy to apply with low-pressure spray. Controls rainwater penetration through exterior block walls and helps control efflorescence, mildew and other moisture-related stains. Treated surfaces exhibit excellent surface beading and do not trap moisture.

Ken-Hatfield-PROSOCO-2018-large

Ken Hatfield
Customer Support

BLOK-GUARD & GRAFFITI CONTROL WB 6

PRODUCT SUPPORT