Blok-Guard & Graffiti Control II
Water-based graffiti and water repellent for porous masonry
Blok-Guard & Graffiti Control II
Water-based graffiti and water repellent for porous masonry
Description
Blok-Guard & Graffiti Control II is a clear-drying, water-based silicone emulsion for weatherproofing concrete block and other porous masonry materials. Blok-Guard & Graffiti Control II protects interior and exterior masonry surfaces from graffiti attacks without altering the natural appearance.
Documentation
- Product Data Sheet
- Safety Data Sheet
- Safety Data Sheet (Spanish)
- SDS Canadian French
- VOC Compliance
- Product Specification
Green Building Information
Sustainability & Testing
Blok Guard Product Family
which product is right for your project
**The following products are ranked on a scale of 1-5, with 1 being the lowest performance (OK to use, but not preferred) and 5 being the highest performance (most effective for the task).**
Always test to ensure desired results.
| Product Name | Solids Content | Base/Carrier | ||
|---|---|---|---|---|
| Blok-Guard & Graffiti Control WB 6 | 6% | Water | 5 | 2 |
| Blok-Guard & Graffiti Control WB 15 | 15% | Water | 5 | 5 |
| Blok-Guard & Graffiti Control 9 | 9% | Solvent | 5 | 3 |
| Blok-Guard & Graffiti Control 15 | 15% | Solvent | 5 | 5 |
| Blok-Guard & Graffiti Control VOC 9 | 9% | VOC Exempt Solvent | 5 | 4 |
| Blok-Guard & Graffiti Control VOC 15 | 15% | VOC Exempt Solvent | 5 | 5 |
FEATURES
-Treated surfaces resist penetration of most types of graffiti.
-Low-odor. Excellent UV stability.
-Simplifies graffiti removal.
-Effectively protects hard-to-seal surfaces.
-Suitable for exterior and interior use.
-Resists water penetration when applied over existing shrinkage cracks of 0.02 inches or less.
TECHNICAL DATA
SHELF LIFE
1 year in tightly sealed, unopened container
VOC CONTENT
<20 g/L Low Solids Coating
FORM
White liquid, slight odor
PH
Non-applicable
COVERAGE RATE
30-175 sq ft/gal. See Product Data Sheet for specific variations per substrate.
FREEZE POINT
32° F (0° C)
FLASH POINT
>212° F (>100° C) ASTM D 3278
TOTAL SOLIDS
6% ASTM D 2369
WT/GAL
8.32 lbs
AVAILABLE SIZES
5-gal, 55-gal
OVERVIEW
Blok-Guard & Graffiti Control II is a clear-drying, water-based silicone emulsion for weatherproofing concrete block and other porous masonry materials. Blok-Guard & Graffiti Control II protects interior and exterior masonry surfaces from graffiti attacks without altering the natural appearance.
Blok-Guard & Graffiti Control II also protects exterior walls exposed to normal weathering. Graffiti removal from treated surfaces is fast and easy using PROSOCO's Graffiti Remover product. Blok-Guard & Graffiti Control II is easy to apply with low-pressure spray. Controls rainwater penetration through exterior block walls and helps control efflorescence, mildew and other moisture-related stains. Treated surfaces exhibit excellent surface beading and do not trap moisture.
Ken Hatfield
Customer Support
BLOK-GUARD & GRAFFITI CONTROL II
PRODUCT SUPPORT
