- Effective protection for hard-to-seal surfaces.
- Controls rainwater penetration through exterior block walls.
- Helps control efflorescence, mildew and other moisture-related stains.
- Treated surfaces exhibit excellent surface beading and withstand extreme temperatures.
- Treated surfaces “breathe” – does not trap moisture.
- Can be recoated to increase or refresh protection.
- Excellent UV stability.
- Low odor.
- Resists water penetration when applied over existing shrinkage cracks of 0.02 inches or less.
Blok-Guard & Graffiti Control WB 15
water & graffiti repellent
Blok-Guard & Graffiti Control WB 15
water & graffiti repellent
Description
Blok-Guard® & Graffiti Control WB 15 is a clear-drying, water-based silicone emulsion for weatherproofing concrete block and other porous masonry materials, like brick, unglazed terra cotta, porous tile, concrete and some natural stones. Blok-Guard® & Graffiti Control WB 15 protects interior and exterior masonry surfaces from repeated graffiti attacks without altering the natural appearance.
This product is freezable. We may delay shipment due to weather to ensure it reaches you in good condition.
This product is subject to VOC regulations, however it is compliant with all national, state, and district AIM VOC regulations
Documentation
- Product Data Sheet
- Product Data Sheet (Canadian French)
- Safety Data Sheet
- Safety Data Sheet (Spanish)
- SDS Canadian French
- VOC Compliance
- Product Specification
- 3-Part Specification
Green Building Information
Features
Technical Data
- SHELF LIFE1 year in tightly sealed, unopened container
- VOC CONTENT<50 g/L
- FORMopaque, white liquid
- PH9.00
- COVERAGE RATE30–175 sq.ft. See Product Data Sheet for specific variations per substrate.
- FREEZE POINT32° F (0° C)
- FLASH POINT>212° F (>100°C) ASTM D3278
- TOTAL SOLIDS15% ASTM D2369
- WT/GAL8.35 lbs
- AVAILABLE SIZES1-gal, 5-gal
Blok Guard Product Family
which product is right for your project
**The following products are ranked on a scale of 1-5, with 1 being the lowest performance (OK to use, but not preferred) and 5 being the highest performance (most effective for the task).**
Always test to ensure desired results.
| Product Name | Solids Content | Base/Carrier | ||
|---|---|---|---|---|
| Blok-Guard & Graffiti Control WB 6 | 6% | Water | 5 | 2 |
| Blok-Guard & Graffiti Control WB 15 | 15% | Water | 5 | 5 |
| Blok-Guard & Graffiti Control 9 | 9% | Solvent | 5 | 3 |
| Blok-Guard & Graffiti Control 15 | 15% | Solvent | 5 | 5 |
| Blok-Guard & Graffiti Control VOC 9 | 9% | VOC Exempt Solvent | 5 | 4 |
| Blok-Guard & Graffiti Control VOC 15 | 15% | VOC Exempt Solvent | 5 | 5 |
OVERVIEW
Blok-Guard® & Graffiti Control WB 15 is a clear-drying, water-based silicone emulsion for weatherproofing concrete block and other porous masonry materials. Blok-Guard® & Graffiti Control WB 15 protects interior and exterior masonry surfaces from repeated graffiti attacks without altering the natural appearance. Weather Seal Blok-Guard® & Graffiti Control WB 15 also protects exterior walls exposed to normal weathering. Blok-Guard® & Graffiti Control WB 15 is easy to apply with low-pressure spray. Graffiti removal from treated surfaces is fast and easy using PROSOCO’s Sure Klean® Graffiti Remover.
Cathy Massey
Customer Support
BLOK-GUARD & GRAFFITI CONTROL WB 15
