HARDSCAPE AND PAVER PRODUCTS
Our suite of products to clean and protect interior and exterior masonry hardscapes are designed with efficiency and simplicity in mind.
Prosoco products are compatible with
Finish
Slate - HD2 Slate - Smooth - HD2 Smooth - HD2 Granitex - HD2 Polished
Cleaning Procedure:
1. Pre-wet the surface and apply diluted cleaning solution according to PROSOCO, Inc. Product Guide instructions.
2. Allow for an appropriate dwell time and periodically agitate:
3. Reapply cleaning solution; do not let cleaner dry into masonry.
4. Rinse thoroughly with plenty of fresh water.*
5. Allow the sample to dry for at least 18 hours and visually examine.
6. Break the sample and compare the through-body surfaces to the cleaned surfaces for the best match.
*Rinsing Equipment – Masonry washing equipment generating approximately 700-800 psi with a water flow rate of 8 gallons per minute delivered through a 40-degree fan spray tip was used for rinsing.
CLEANers
CLEANS A MULTITUDE OF SURFACES
When to use it
2010 All Surface Cleaner is a great maintenance product, ideal for spring cleaning.
Dilution ratio 1:10
Dwell time 10 minutes
GENERAL PURPOSE STAIN REMOVER
When to use it
Light Duty Concrete Cleaner removes rust, mud, atmospheric dirt, mortar smears, and other stains.
Dilution ratio 1:2 or 1:3
Dwell time 5 minutes
NEW HARDSCAPE FINAL CLEAN
When to use it
Use Safety Klean to remove polymeric sand haze, excess mortar, dirt, efflorescence, and other job-site staining and soiling
Dilution ratio 1:2 or 1:3
Dwell time 5 minutes
EXTRACT EMBEDDED OIL STAINS
When to use it
Use Oil & Grease Stain Remover to remove motor oil, brake and power-steering fluid, anti-freeze, hydraulic fluids, cooking oils, food grease and other oil-based stains.
Dilution ratio Do not dillute or alter
Dwell time until fully dry
CLEAN SENSITIVE BRICK AND STONE
When to use it
Use Vana Trol to remove efflorescence, metallic stains, vanadium, manganese.
Dilution ratio 1:6 or 1:8
Dwell time 5 minutes
#1 SELLING NEW MASONRY CLEANER
When to use it
Use 600 to remove mortar smears, dirt, efflorescence and other job-site staining and soiling
Dilution ratio 1:6 or 1:8
Dwell time 5 minutes
CONCENTRATED POWER CLEANER
When to use it
Use Heavy Duty Concrete Cleaner to remove concrete splashes, excess mortar, retarders, heavy efflorescence, embedded stains, rust and surface soiling from textured concrete surfaces.
Dilution ratio 1:4 or 1:6
Dwell time 3 minutes
ALL-WEATHER ADHESIVE
Ready-to-use on most hardscape surfaces, PROSOCO Adhesive bonds and cures in wet weather and on damp substrates and tolerates rain before, during and after application.
Get PROSOCO's free
Masonry Stain Identification Guide
Our 29-page guide is chalked full of helpful information on identifying, removing, and preventing the 19 most common stains that occur on masonry buildings.
PROTECT
STOPS SAND JOINT EROSION
Sand Joint Stabilizer protects concrete, clay, natural stone pavers. Prevents water, dirt, oil and weed growth from deteriorating joints and pavers.
PENETRATES DEEPLY TO BLOCK WATER & SALT
Saltguard protects brick, concrete and non-calcareous stone. Prevents moisture intrusion and water and salt related staining or deterioration. VOC compliant & water-based options available.
PRESERVES THE NATURAL LOOK OF STONE
Natural Stone Treatment protects brick, block, concrete and unpolished stone. Prevents the severity of biological staining common to regions with high relative humidity, dark staining and degradation caused by fungal growth, mold and mildew.
Natural Stone Treatment only available in the U.S.
PROTECTS DENSE & COLOR-SENSITIVE SURFACES
SL100 Water Repellent protects horizontal and vertical concrete and masonry surfaces against water and waterborne contaminants. Offering invisible protection and low volatility, SL100 ensures maximum penetration and colorless protection of dense, color-sensitive surfaces.
FORMS A GLOSSY SHIELD FOR MASONRY
Gloss ‘N Guard and Satin Guard WB protects concrete, clay, natural stone pavers and porous tile. Prevents water, dirt and oil penetration, organic stains, scuffing and heel marks. Water-based option available.
