Oil & Grease Stain Remover

Poultice cleaner for embedded oil and grease stains

  • Oil-Grease-Stain-Remover-1-Gal
  • Oil-Grease-Stain-Remover-5-Gal
  • Oil-stain-removed-with-Oil-and-Grease-Stain-Remover
  • Oil-and-Grease-Stain-Remover-on-polished-concrete-floor
  • Oil-Grease-Stain-Remover-1-Gal
  • Oil-Grease-Stain-Remover-5-Gal
  • Oil-stain-removed-with-Oil-and-Grease-Stain-Remover
  • Oil-and-Grease-Stain-Remover-on-polished-concrete-floor

Oil & Grease Stain Remover

Poultice cleaner for embedded oil and grease stains

Oil & Grease Stain Remover is a poultice cleaner for pulling stubborn oil and grease stains out of pavers, concrete, stone and other porous surfaces. After pouring Oil & Grease Stain Remover onto an embedded stain, it spreads out to make an instant poultice – no mixing, troweling, plastic covering or tape needed. As the poultice dries, it pulls the contaminants out of the substrate.

Available at distributors nationwide. Call 888-216-3039.

Colleen-Peters-PROSOCO-large

Colleen Peters, Hard Surface Care Customer Support

OIL & GREASE STAIN REMOVER

PRODUCT SUPPORT

  • Works on concrete, pavers, block, stone, tile and brick.
  • Removes motor oil, brake and power-steering fluid, anti-freeze, hydraulic fluids, cooking oils, food grease and other oil-based stains.
  • Works on old, deeply-set stains.
  • Easy to use. No mixing or scrubbing needed.
  • SHELF LIFE2 years in tightly sealed, unopened container
  • VOC CONTENT4% maximum
  • FORMWhite, viscous liquid; slight citrus fragrance
  • PH10.5
  • COVERAGE RATEApproximately 6 sq ft/qt, Approximately 24 sq ft/gal
  • FREEZE POINT32° F (0° C)
  • FLASH POINT>200° F (>93° C) ASTM D 3278
  • TOTAL SOLIDSNon-applicable
  • WT/GAL8.75 lbs
  • AVAILABLE SIZES 1-qt,1-gal, 5-gal

OVERVIEW

PROSOCO® Oil and Grease Stain Remover is a poultice cleaner for pulling stubborn oil and grease stains out of pavers, concrete, stone and other porous surfaces. Just pour Oil & Grease Stain Remover on the embedded stain. It spreads out to make an instant poultice – no mixing, troweling, plastic covering or tape needed. As the poultice dries, it pulls the contaminants out of the substrate, capturing them in its highly absorbent blend of batter-thick surfactants, solvents and powders. After a 5–8 hour dwell, simply sweep up the dried poultice and its absorbed contaminants for easy disposal.