Light Duty Sock Anchor
Grout-injection sock anchoring system
Light Duty Sock Anchor
Grout-injection sock anchoring system
Description
stabilizes rubble-filled masonry or stone walls with large voids, multi-wythe solid masonry, and even cavity constructions with hollow backup materials. The Light Duty Sock Anchor features a sleeved, stainless steel helical core which makes this anchoring method simple and cost-effective.
OVERVIEW
A sleeved version of the PROSOCO Grout-Tie, the PROSOCO Light Duty Sock Anchor (LDS) features a sleeved, stainless steel helical core which makes this anchoring method simple and cost-effective. The PROSOCO LDS can be used to pin rubble-filled masonry or stone walls with large voids, multi-wythe solid masonry, and even cavity constructions with hollow backup materials.
COST-EFFECTIVE
FULLY CONCEALED
QUICK & SIMPLE
MINIMUM
DISTURBANCE
DOESN’T ADD TENSION
BETWEEN WYTHES
STABILIZES SOLID &
CAVITY MASONRY WALLS
OVERVIEW
PROSOCO DensiKure combines the chemistries that densify and harden concrete with ones that cure concrete, eliminating the normal wait times between the two steps while the concrete hardens, dries and cures. By forming a membrane on the surface of new concrete, DensiKure locks in moisture to enable a complete cure. Treated concrete floors are typically dry in 60 minutes. A single-source densifier and cure, DensiKure helps a new concrete slab retain the moisture it needs to properly cure, and prevents water getting out of the concrete too quickly via vapor transmission.
Get the brochure
