- Works on concrete, pavers, block, stone, tile and brick.
- Removes motor oil, brake and power-steering fluid, anti-freeze, hydraulic fluids, cooking oils, food grease and other oil-based stains.
- Works on old, deeply-set stains.
- Easy to use. No mixing or scrubbing needed.
Oil & Grease Stain Remover
Poultice cleaner for embedded oil and grease stains
Oil & Grease Stain Remover
Poultice cleaner for embedded oil and grease stains
Description
Oil & Grease Stain Remover is a poultice cleaner for pulling stubborn oil and grease stains out of pavers, concrete, stone and other porous surfaces. After pouring Oil & Grease Stain Remover onto an embedded stain, it spreads out to make an instant poultice – no mixing, troweling, plastic covering or tape needed. As the poultice dries, it pulls the contaminants out of the substrate.
for professional use
Find a Distributorfor personal use
Buy NowDocumentation
Colleen Peters, Hard Surface Care Customer Support
OIL & GREASE STAIN REMOVER
PRODUCT SUPPORT
Features
Technical Data
- SHELF LIFE2 years in tightly sealed, unopened container
- VOC CONTENT4% maximum
- FORMWhite, viscous liquid; slight citrus fragrance
- PH10.5
- COVERAGE RATEApproximately 2-3 sq ft/qt, Approximately 8-12 sq ft/gal
- FREEZE POINT32° F (0° C)
- FLASH POINT>200° F (>93° C) ASTM D 3278
- TOTAL SOLIDSNon-applicable
- WT/GAL8.75 lbs
- AVAILABLE SIZES 1-qt,1-gal, 5-gal
OVERVIEW
PROSOCO® Oil and Grease Stain Remover is a poultice cleaner for pulling stubborn oil and grease stains out of pavers, concrete, stone and other porous surfaces. Just pour Oil & Grease Stain Remover on the embedded stain. It spreads out to make an instant poultice – no mixing, troweling, plastic covering or tape needed. As the poultice dries, it pulls the contaminants out of the substrate, capturing them in its highly absorbent blend of batter-thick surfactants, solvents and powders. After a 5–8 hour dwell, simply sweep up the dried poultice and its absorbed contaminants for easy disposal.
