- Long-lasting protection
- Does not form a film or gloss
- 100% silane
- Compatible with silicate hardeners/densifiers
- Treated surfaces “breathe” – does not trap moisture
- Easy to apply with conventional spray equipment
- Reduces efflorescence, mildew and atmospheric staining.
- Leaves little or no residue on clean window glass. Always test
- Forms an effective chloride screen that reduces surface erosion and corrosion of rebar in reinforced concrete caused by water and water-carried salts
- Safe for use on surfaces subjected to vehicle traffic
- Suitable for application on cured, cured & honed, and cured & polished concrete
- Resists water penetration when applied over existing shrinkage cracks of 0.02 inches or less
- Suitable for sale in most states and districts with more restrictive AIM VOC regulations
Silane 100
100% active, clear, penetrating silane water repellent
Silane 100
100% active, clear, penetrating silane water repellent
Description
PROSOCO Silane 100 is a modified, “neat” silane system that offers invisible protection and low volatility. Silane 100 protects horizontal and vertical concrete and masonry surfaces against water and waterborne contaminants. The absence of a solvent carrier enables applicators to achieve up to 5 times the coverage rate normally achieved with solvent-reduced protective treatments. Depth of penetration is controlled by the application rate (loading rate).
Documentation
Features
Technical Data
- FORMclear, slightly yellow liquid, slight alcohol odor
- SPECIFIC GRAVITY0.88
- pHnot applicable
- COVERAGE RATEConcrete 150–400 sq.ft, Fired Clay 200–500 sq.ft., Granite 1000–1500 sq.ft., Sandstone s 200–400 sq.ft., Slate 300–600 sq.ft
- ACTIVE CONTENT100%
- VOC CONTENT350 g/L maximum Reactive Penetrating Sealer
- FLASH POINT>149° F (>65° C) ASTM D3278
- WT/GAL7.33 lbs
- WATER VAPOR TRANSMISSION82% retention ASTM D6490
- SHELF LIFE1 year in tightly sealed, unopened container
Vauncele Pearson
Product Support - Hard Surface Care
SILANE 100
PRODUCT SUPPORT
OVERVIEW
PROSOCO® Silane 100 is a modified, “neat” silane system that offers invisible protection and low volatility. Silane 100 protects horizontal and vertical concrete and masonry surfaces against water intrusion and salt attack. The absence of a solvent carrier enables applicators to achieve up to 5 times the coverage rate normally achieved with solvent-reduced protective treatments. Depth of penetration is controlled by the application rate (loading rate).
RELATED PRODUCTS
