'

H100 Consolidation Treatment

Stone and masonry strengthener & water repellent

  • stone consolidation treatment
  • H100-stone-strengthener
  • stone consolidation treatment
  • H100-stone-strengthener

H100 Consolidation Treatment

Stone and masonry strengthener & water repellent

more...

Ken-Hatfield-PROSOCO-2018-large

Ken Hatfield, Hard Surface Care Customer Support

H100 CONSOLIDATION TREATMENT

PRODUCT SUPPORT

  • One component – easy to use.
  • Low viscosity allows deep penetration. Will not form hardened surface crust.
  • No synthetic polymers.
  • Rapid tack-free drying – no dirt attraction.
  • Vapor-permeable. Treated surfaces “breathe.”
  • SHELF LIFE1 year in tightly sealed, unopened container
  • VOC CONTENT>400 g/L
  • FORMClear, colorless to slight yellow liquid with alcohol odor
  • PHNon-applicable
  • COVERAGE RATESee Product Data Sheet for variations per substrate.
  • FREEZE POINT<–22°F (<–30°C)
  • FLASH POINT110°F (43°C) ASTM D 3278
  • TOTAL SOLIDS47% ASTM D 5095
  • WT/GAL7.79 lbs
  • AVAILABLE SIZES1-qt, 5-gal, 55-gal

OVERVIEW

For badly deteriorated stone that requires consolidation and protection from water, Conservare H100 is a combination consolidation/water-repellent treatment. This ethyl silicate treatment, modified with a silane water repellent, replaces the natural binding materials while protecting the treated surface from water-related deterioration. H100 may be used on most types of sandstone, limestone, cast stone, stucco, brick and terra cotta. One component - easy-to-use. Low viscosity allows deep penetration. Will not form hardened surface crust. The new binder is mineral - similar to the original stone - no synthetic polymers. Forms no byproducts harmful to the masonry. Good vapor permeability - the treated surface breathes. New binder is acid-resistant - resists acid rain.