515 Copper Stain Remover

poultice cleaning system

  • 515-Copper-Stain-Remover-Part-A
  • 515-Copper-Stain-Remover-Part-B-5-gal
  • 515-Copper-Stain-Remover-Part-A
  • 515-Copper-Stain-Remover-Part-B-5-gal

515 Copper Stain Remover

poultice cleaning system

Sure Klean 515 Copper Stain Remover is a special two-part cleaning system designed to remove copper stains from masonry surfaces. It’s packaged in two parts: dry powder (Part A) and liquid additive (Part B). 515 Copper Stain Remover is designed to solubilize deep-seated copper sulfate stains and draw staining elements out of the masonry.

Available at distributors nationwide. Call 888-216-3028. This is a special order product. Production lead times and quantity minimums may apply.

Colleen-Peters-PROSOCO-large

Colleen Peters, Hard Surface Care Customer Support

515 COPPER STAIN REMOVER

PRODUCT SUPPORT

  • Does not etch or otherwise harm the masonry surface.
  • No special tools or equipment required – apply with standard plasterer’s trowels and brushes.
  • Appropriate for use with PROSOCO’s OverCoat, temporary protective paper film.
  • SHELF LIFE3 years in tightly sealed, unopened container
  • VOC CONTENTNon-applicable
  • FORMLight brown powder
  • PH5.0
  • COVERAGE RATEWhen mixed, 1 qt covers approximately 2 sq ft
  • FREEZE POINTNo data
  • FLASH POINTNo data
  • TOTAL SOLIDSNon-applicable
  • WT/GALNo data
  • AVAILABLE SIZES25-lb, 5-gal

OVERVIEW

Sure Klean® 515 Copper Stain Remover is a special two-part cleaning system designed to remove copper stains from masonry surfaces. It’s packaged in two parts: dry powder (Part A) and liquid additive (Part B). Parts A and B are mixed on site into a poultice and brush- or trowel-applied over the stained surface. 515 Copper Stain Remover is designed to solubilize deep-seated copper sulfate stains and draw staining elements out of the masonry and into the poultice mix. The poultice material is then scraped from the surface and the masonry cleaned with a water wash.