Concrete Protector SB is a VOC-compliant, solvent-based, penetrating water, oil and stain repellent
that can be applied to every kind of finished concrete flooring. Treated surfaces retain their natural
appearance, texture and breathability, and feature improved stain resistance, which simplifies the
maintenance cleaning process.

Yes, Concrete Protector SB is compliant with the US Environmental Protection Agency’s AIM OC
regulations. Visit prosoco.com/voccompliance to confirm compliance with individual district or state
regulations.

Concrete Protector SB has very little, if any, odor, and is suitable for use in occupied spaces.

Concrete Protector SB is ideal for use in areas where spills and stains occur and where no additional
surface sheen and enhancement is desired. Additionally, it is recommended for areas of high traffic or
wheeled traffic where surface film-forming sealers may prematurely wear off.

Concrete Protector SB is not recommended for areas exposed to long-standing periods of water ponding
or below-grade applications. This product will not provide UV protection to concrete floors colored with
Consolideck GemTone Stain or ColorHard. Consolideck LSGuard or PolishGuard are more appropriate.

Once dry, Concrete Protector SB may be burnished using a high-speed burnisher fitted with a
Consolideck® Heat Burnishing Pad or 1500–3000 grit diamond polishing pad suitable for use on high-gloss
finishes. In addition to smoothing and polishing the treated surface, high-speed burnishing can help
to remove any surface haze from possible over-application. Best results are obtained when Concrete
Protector SB is allowed to dry for at least 4 hours prior to burnishing.

Yes, Concrete Protector SB may be applied to surfaces previously treated with LSGuard or PolishGuard.
Please refer to the Concrete Protector SB Product Data Sheet for appropriate coverage rates.