CTP 16

Cost-effective brick tie to secure air barriers and veneers

  • CTP-16-side-view
  • CTP-16-side-view

CTP 16

Cost-effective brick tie to secure air barriers and veneers

The CTP 16 veneer anchor system combines a 3/16-inch-diameter wire tie with a base plate to provide adjustability, minimal free-play, strength, stiffness, positive connection and corrosion-resistant anchoring in masonry veneers. This system can achieve assembly stiffness greater than 63,000 pounds per inch in tension and 13,800 pounds per inch in compression. The system is designed to produce a single-positive connection using the center hole location to the back-up structure with mechanical fasteners.

  • One-third less invasive than barrel-type ties; fewer breaches in the air and vapor barrier.
  • Provides excellent strength and performance in worst-case scenarios.
  • Large bearing area keeps compressive stresses low and minimizes localized crushing and damage to the sheathing and moisture barrier.
  • Can accommodate insulation thicknesses up to 4 inches.

OVERVIEW

The CTP 16 is a patented wire tie and plate combination system which provides adjustability, minimal free-play, strength, stiffness, positive connection, and corrosion resistance. Using the patented CTP WT Tie wire tie for reinforcement or the standard CTP V Tie meets relevant veneer tie requirements of TMS 402. The anchor plate has been designed for mounting on the surface of sheathing or stud, and accommodates properly oriented insulation board without puncture. The vertical orientation of the CTP 16 base plate assures good coverage of spray foam insulation. It prevents gaps found beneath horizontal plates, and doesn’t require secondary cleaning of spray foam insulation common to other adjustable tie systems.

Ted Barnekoff - Air & Water Barriers, PROSOCO

Ted Barnekoff
Customer Support

PROSOCO-Partnerships

News

PROSOCO acquires Construction Tie Products (CTP)

PROSOCO Inc., a Lawrence, Kan.-based manufacturer of construction chemicals, has acquired Construction Tie Products to expand its product offerings in the new construction and restoration masonry markets. Since 2005, Construction Tie Products, commonly known as CTP, has manufactured high quality masonry restoration anchors and wall ties. With staff members possessing[…]